海洛电子是专业从事IC代工烧录、自动烧录器,屏蔽箱、拷贝机等产品的研发制造和销售,服务涉及销售及租赁以及芯片配套测试解决方案等。凭借前瞻决策、扎根科技和专业制造,海洛电子不断发展壮大,时刻保持着强势的市场竞争力和弹性的配合度。公司秉持着[专业、品质、诚信、服务]的经营理念,以服务客户为己任,
以诚信服务,合作共赢为公司方针,我们将不断创新技术,提供更多的产品供客户选择。
联系电话:13925506787 地址:东莞市长安镇河东二路44号
The SF600 is a high speed "in System Programming" programmer to update the SPI Flash soldered on board (In-Circuit Programming) or in the socket adaptor (Offline programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.
SF600 combines the advantages of SF100 with additional improvements: High-speed USB and higher SPI performances.
USB High speed and high SPI performance, support up to 2Gb SPI Flash
In circuit Programming: Program on-board SPI Flash
Offline Programming: Program SPI Flash in the socket
ISP Port supports 2 CS pins to program two Serial Flash memories
Start button feature: Able to Batch in the USB mode
Signal conflict protections
Multi-Programmers Capability through USB
Support 1.8V low voltage IC
Support Windows 2003 and above
Support both 32 and 64 bit OS
High performance (25MHz, Single IO)
USB Mode | Reference IC | Density | (Program + Verify) |
Memory size | W25X80VSSIG | 8Mb | 9s |
W25Q16VSSIG | 16Mb | 11.6s | |
W25Q32VSSIG | 32Mb | 12.6s | |
W25Q64FVSSIG | 64Mb | 31s | |
W25Q128BVFIG | 128Mb | 61.7s | |
W25Q256FVFIG | 256Mb | 89.2s | |
S25FL512SAGMFI011 | 512Mb | 147.4s |
*Please note the programming and verify time will depend on different IC type; please refer to the IC specification before programming.
SF600 is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF600 2x10 header pin out. DediProg also provides the SF600 ISP Cable which is used to connect the SF600 programmer to the 2X6 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF600 ISP Cable 2x6 pin out.
Table 1: SF600 ISP Header Pin Out (2x10)
1 | Vpp | CS2 | 2 |
3 | CS1 | Vcc | 4 |
5 | MISO/DQ1 | Hold/DQ3 | 6 |
7 | Wp/DQ2 | CLK | 8 |
9 | GND | MOSI/DQ0 | 10 |
11 | NC | Reset/IO3 | 12 |
13 | NC | NC | 14 |
15 | NC | NC | 16 |
17 | NC | NC | 18 |
19 | GPIO1 | GPIO2 | 20 |
Table 2: ISP Cable Connector Pin Out (2x6)
1 | Vpp | CS2 | 2 |
3 | CS1 | Vcc | 4 |
5 | MISO/DQ1 | Hold/DQ3 | 6 |
7 | Wp/DQ2 | CLK | 8 |
9 | GND | MOSI/DQ0 | 10 |
11 | NC | Reset | 12 |
The SF600 USB software tool chain offers high flexibility and fits the different and highest requirements:
Engineering Mode
For engineers and expert to access advanced features for development, repairing etc.
Production Mode
For operators in production to control multiple programmers and improve the throughput.
Command Line
Customer software can control multiple SF600 programmers by command line interface.
To have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes: AN0103 and AN0106
SF600 Programmer x 1
USB Cable x 1
ISP Cable (ISP-600-CB1-G) x 1
SF100 2.54mm 2*4 ISP Cable (ISP1-CB) x 1
SF600 Universal Adaptor (ADP-SF600-TO-SF100) x 1
CD-ROM (Included Software, specifications and user manual) x 1
Backup Boot Flash Module-8N
Backup Boot Flash Module-8W
Backup Boot Flash Module-D8W
Backup Boot Flash Module-DIP
Backup Boot Flash Module-16W
Backup Boot Flash Module QUAD-8W